Beneteau

Perfectly designed to take full advantage of sea and sun, these three new boats on the Beneteau Flyer 550 Sun Deck Power Boat combine taut and elegant lines designed by Pierangelo Andreani with a particularly high performance hull. Let yourself be carried away!

Even the most compact is already surprisingly spacious, with a large cockpit, proper sunbathing platform and ergonomic helm position. The sea is at your command.

  • Planing hull, stable and fast
  • Increased performance with 115 HP engine
  • Space worthy of a 6m boat due to the aft bench position
  • Wide cockpit bench capable of seating 4 persons
  • Ergonomic, comfortable helm position capable of taking 2 persons
  • Large forward sunbathing platform
  • Cabin: large amount of stowage space and easy access through the sliding door
  • Trailerable
Beneteau_Flyer_550_Sun_Deck_Power_Boat
Naval Architect Beneteau Power
Boat Designer P .Andréani
Length Overall 5.71 m
Hull Length 5,21 m
Hull Beam 2,34 m
Max. Engine Power 150 hp
Fuel Capacity 100 l
CE Certification C6 / D6
Light Displacement 970 Kg

Beneteau Flyer 550 Sun Deck Power Boat Construction -
Composition: GRP and additional foam buoyancy. White hull.
Winching eyebolt on bow.

Beneteau Flyer 550 Sun Deck Power Boat Deck -
Composition: GRP Sandwich with high density Airex foam core.
Stainless steel open pulpit.
Aluminium bow roller fitting.
Self-draining anchor well with closing hatch.
Eyebolt for attaching bitter end.

The two new FLYER Cabrios with their fast hulls allow day trips or coastal cruising sheltered from the wind and spray behind an elegantly shaped glass windscreen. Pierangelo Andreanis deck design shows a sporty temperament, which will not escape the notice of water sports afficionados

  • Large comfortable cockpit:
  • Wide protected sunbathing platform
  • Large practical cockpit:
  • Sprayhood stowage built-in to transom
  • Removable cushions and backrests for over-wintering
  • 2 stowage lockers in bench seats
  • Versatile anchoring and boarding:
  • A proper cabin for coastal cruising
  • Double berth
Beneteau_Flyer_650_Cabrio
Naval Architect BENETEAU POWER
Boat Designer P. ANDREANI
Length Overall 6.15 m
Hull Length 6.03 m
Hull Beam 2.44 m
Max. Engine Power 200 HP
Fuel Capacity 137 l
Water Capacity 50 l
Draught 0.40/0.80 m
Air Draught 1.55 m
CE Certification C7 D7
Light Displacement 1435 kg

Glamorous and sporty!

The two new FLYER Cabrios with their fast hulls allow day trips or coastal cruising sheltered from the wind and spray behind an elegantly shaped glass windscreen. Pierangelo Andreani’s deck design shows a sporty temperament, which will not escape the notice of water sports’ afficionados.

Generous cockpit

The feeling of comfort combined with the protection of the all-round windscreen is further emphasised by a surprisingly spacious cockpit. The seats with cushions, backrests and headrests (six in the Flyer 550 Cabrio, seven in the 650 Cabrio) form a semicircle around the double-seat helm position.

Be even more sociable, the Flyer 650 Cabrio also gives the benefit of an exterior galley.

FLYER 550 CABRIO

Length overall: 5.35m
Hull length: 5.21m
Hull beam: 2.34m
Light displacement: 1,030 kg
Draught: 0.2 / 0.6m
Fuel capacity: 100L

Fresh water capacity: 0L Maximum recommended engine size: 115HP
Navigation categories requested : C6/D6
Night space in the cabin and cockpit

With their double berth sleeping cabin forward and their convertible cockpit, these two new Flyer Cabrios increase the choice of sailing activities. Very easy to install, the cabriolet hood gives builtin protection allowing two additional people to be accommodated for the night.

Principal features:

  • Large, comfortable cockpit:
  • 6 seats with cushions, backrests and headrests for the Flyer 550 Cabrio/ 7 for the Flyer 650 Cabrio
  • Driver’s seat with bolster function (sitting/ standing)
  • Tilting backrest/ lounger (Flyer 550 Cabrio); co-driver’s seat/ sunbed (Flyer 650 Cabrio)
  • Excellent protection by means of a wide windscreen surrounding the cockpit
  • Built-in protection with the cabriolet hood (very easy to install)
  • Practical cockpit:
  • Hood stowage built into transom
  • Removable cushions and backrests
  • Two stowage lockers in bench seats
  • Flexibility when anchoring and boarding:
  • Anchor from bow/stern (flexibility of two anchor wells)
  • Boarding access forward and aft

On the Flyer 650 Cabrio:
The same features as the FLYER 550 Cabrio with, in addition:

  • Wide, protected sunbathing platform in cockpit
  • Real cabin:
  • Double berth (Trajan Sand upholstery- Optional)
  • For coastal cruising:- Pressurised fresh water + refrigerator (option) + hob (optional)

Water sports enthusiasts as well as those just wanting relaxation will love the performance of this outboard model, which claims to offer exceptional and innovative comfort across all types of sailing ground, whether sheltered, windy or very sunny. Or perhaps the retro charm and sportiness of its refined lines alone will be enough to win their hearts. Designed by Pierangelo Andréani, this sleek streamlined design is aimed at day-boating for water sports activities or trips to an anchorage, bathing, relaxing and the joy of sailing.

  • Airt Step Hull
  • Large comfortable cockpit:
  • Wide protected sunbathing platform
  • Sprayhood stowage built-in to transom
  • Removable cushions and backrests for over-wintering
  • A proper cabin for coastal cruising
  • Double berth
Beneteau_Flyer_750_Cabrio
Naval Architect BENETEAU POWER BOATS
Boat Designer ANDREANI
Length Overall 7.20 m
Hull Length 6.99 m
Hull Beam 2.51 m
Max. Engine Power 300 cv - 2 x 150 cv
CE Certification C8/D8 demandé
Light Displacement 2 080 kg

The Antares 42 will be previewed at the Paris and London Boat Show. An Antares has never offered such a large living space ! Designed for cruising with the family, the Antares 42 offers with vis-a-vis, large Flybridge, 2 cabins, 2 washrooms, a convertible saloon for 6 berths on one of the most efficient hull on the market.

  • Large living space
  • Designed for cruising with the family
  • Larger volume : saloon
  • A convertible saloon for 6 berths
  • Most efficient hull on the market
  • Performance: speed versus fuel consumption
  • Wheelhouse size and brightness
  • very large convertible saloon
  • 3-panel glazed door
  • Owners cabin shower

Beneteau_Antares_42

Naval Architect BENETEAU POWER BOATSmage
Boat Designer SARRAZIN DESIGN
Length Overall 13.99 m
Hull Length 12.80 m
Hull Beam 4.09 m
Max. Engine Power 2 X 380 hp (Yanmar)
Fuel Capacity 2 x 600 l
Water Capacity 320 l
Draught 1.10 m
Air Draught 4.75 m
CE Certification B10 / C12 / D12
Light Displacement 9 900 kg
Berths 6

HULL
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - White gel coat - Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fibre) - Profile: Semi-floating lower hull with bell V bow - Side stabiliser skids -

DECK
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - Structural counter moulding in monolithic laminate - Composition: (Polyester resin - Glass fibre) - White gel coat - Diamond tip type non-slip covering -

OPTIONS
PACKS ELECTRONIC

  • Digital radar 4 Kw • Receiver AIS
  • VHF Double station
  •  

OTHER OPTIONS

  • Woodwork Alpi Mahogany “Grand Brillant” • Complete mooring kit
  • Aft cockpit closing Dune • Console cover Fly
  • Bimini top Flying bridge • Cockpit wheelhouse cover Dune
  • Hydraulic gangplank Stainless steel • White outside wheelhouse curtains
  • Pump for deck washing (Sea water) • Shore freshwater supply
  • Generator 9,5 KVA 220V/50HZ ONAN • Ice maker Cockpit 220V
  • Air conditioning 220V • Forced air heating fuel
  • Carpet AURAY • Rigid reserve WC 50L Drain Deck/Sea grav.
  • tarboard forward • Quiet Flush electric toilet Port forward
  • White and steel blue hull • TV aerial
  • Television LCD 20’’ + DVD and MP3 player in master cabin
  • Television LCD 20’’ + DVD/MP3 player in the saloon
  • Fully electric kitchen 220V (Ceramic hob + Microwave oven/ Grill)
  • Solid wood decked catwalks

The Antares 36 inaugurates the new generation of large Antares with the keywords more space, and more comfort.

The first powerboat to offer a large complete flybridge (driving position + saloon + sunbathing platform).

The first powerboat to offer 2 double berth cabins.

  • Greater living space - Large flybridge (dimensions same as Antares 12 flybridge)
  • Large L-shaped galley opposite saloon
  • Removable saloon seats
  • Practical layout
  • Ample stowage (under saloon and driver benches)
  • Wide access hatches to technical areas (engine plumbing electricity)
  • Sliding door to owners cabin
  • Heads with separate shower andWC compartments
Beneteau_Antares_36
Naval Architect BENETEAU POWER
Boat Designer P. SARRAZIN
Length Overall 11.35 m
Hull Length 9.97 m
Hull Beam 3.80 m
Max. Engine Power 2x260 HP
Fuel Capacity 640 l
Water Capacity 320 l
Draught 1.00 m
CE Certification B8 / C10
Light Displacement 6 540 kg

HULL

  • Composition: Sandwich (Polyester resin Glass fibre / Balsa core)
  • White gel-coat
  • Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fibre)
  • Profile: Semi-floating lower hull with bell V bow - Side stabiliser skids -

DECK
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - Part counter moulding structure in monolithic laminate (Polyester resin - Glass fibre) - White gel-coat - Diamond tip type non-slip surface - Joining hull / deck with sheer rail aluminium and grey rubber -

  • 11.37 m
  • 3,88 m
  • 0,9 m
  • 7 076 kg
  • 324 l
  • 650 l
  • Volvo 2 x 260 HP
  • 2
  • 4+1
  • 1

Perfectly designed to take full advantage of sea and sun, these three new boats on the Beneteau Flyer 650 Sun Deck Power Boat combine taut and elegant lines designed by Pierangelo Andreani with a particularly high performance hull. Let yourself be carried away! Even the most compact is already surprisingly spacious, with a large cockpit, proper sunbathing platform and ergonomic helm position. The sea is at your command.

  • Stable and performance planing hull
  • Trailerable
  • Wide 5 / 6-seater cockpit bench
  • Versatile cockpit for fishing or cruising
  • Large sunbathing platform forward
  • Choice of 2 drivers seats: Bolster function or Leaning post
  • double berth
Beneteau_Flyer_650_Sun_Deck_Power_Boat
Naval Architect BENETEAU POWER
Boat Designer P. ANDREANI
Length Overall 6.15m
Hull Length 6,03m
Hull Beam 2,44m
Max. Engine Power 175hp
Fuel Capacity 137 l
Water Capacity 50 l
Draught 0,40 / 0,80
Air Draught 1,60m
CE Certification C7 / D7
Light Displacement 1390m

HULL

Composition: Polyester - Injection moulded hull - White gel-coat - Hull completely counter moulded - Composition: Polyester - Winching ring on bow -

DECK

Composition: Polyester sandwich - White gel-coat -

The Antares 32 is the first twin-engined Flybridge in the BENETEAU range, and delivers exceptional responsiveness and comfort at sea for exceptional responsiveness .

The twin-engined configuration provides much greater manoeuvrability in port and better balance underway. The model will make its first appearance at the Genoa Boat Show in October 2010, then Barcelona. Not Present at Paris or London

  • First twin-engined Flybridge
  • Exceptional responsiveness
  • Twin Nannii T4-200
  • First appearance at the Genoa Show Oct 2010

Beneteau_Antares_32

Boat Designer Sarrazin Design
Length Overall 10.22 m
Hull Length 9.20 m
Hull Beam 3.33 m
Max. Engine Power 2 x 200 CV
Fuel Capacity 375 L
CE Certification B8/C10
Light Displacement 4 515 kg

HULL Composition:

  • Sandwich (Polyester resin - Glass fiber / Balsa core)
  • 'white gel coat
  • Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fiber) Profile:
  • Semi-floating lower hull with bell V bow
  • Side stabiliser skids

DECK Composition:

  • Sandwich (Polyester resin - Glass fiber / Balsa core)
  • Part counter moulding structure in monolithic laminate (Polyester resin - Glass fiber)
  • White gel coat
  • Diamond tip type non-slip covering
  • Joining hull / deck with sheer rail aluminium and grey rubber

 

The first Flybridge in the Antares range!

This model is available in a Flybridge or Sedan verson (Non Flybridge)

From this year onwards, all Antares models over 9 metres will have their length in feet included as part of their model name. And that�s the case with this new launch, which replaces and upgrades the 9 Series with 3 Flybridge/Hard Top versions. As the first Flybridge in the range, it is designed primarily for cruising, and retains all the excellent seakeeping qualities on which the Antares reputation has been built.

Sarrazin Design is famous for sleek elegance of line, and their style is unmistakable in this Antares 30. Its grey-tinted glass makes a special contribution to this sophisticatedly-modern design. The hull is the work of the Beneteau design team, and is available in single-engine configuration only.
Beneteau_Antares_30

 

There are three versions to choose from:
Without flybridge: the Antares 30 S version with two opening hard top panels With flybridge, but without helm station: large sunbathing area and cockpit table on the flybridge With flybridge and helm station convertible to a sunbathing platform

  • The convenient transom skirt and ladder make for easy access.
  • Comfortable sunbathing platform (optional).
  • Comfortable saloon arranged
  • The double control panel
  • Wheelhouse is large and bright for all-round vision at sea.
  • The saloon converts to accommodate a double
  • The owners bow cabin offers a central bed measuring

From this year onwards, all Antares models over 9 metres will have their length in feet included as part of their model name. And that’s the case with this new launch, which replaces the 9 Series with 30 Flybridge/Hard Top versions.

As the first Flybridge in the range, it is designed primarily for cruising, and retains all the excellent sea keeping qualities on which the Antares reputation has been built. Sarrazin Design presents a sleek elegant line, and their style is unmistakable for the Antares 30. Its grey-tinted glass makes a special contribution to the sophisticated modern looks.

The hull is the work of the Beneteau design team, and is available AT THE MOMENT with a single-engine configuration only.

There will be three versions to choose from the 30 Antares.

The S version is with hard top with two opening panels, with flybridge but no helm station featuring a large sunbathing area and settee with table up top, and with flybridge and helm station convertible to a sunbathing platform. According to Beneteau the amount of living space is unrivalled by any other boat of this size. Accommodation is a four berth lower deck with a convertible saloon to double berth. The guest cabins are an owners double to fore, and a double bunk to port. To starboard is the fully equipped head.

Beneteau Antares 30  will have max single engine power up to 380hp, and will be certified to CE B standards.

 

NOW AVAILABLE AS THE 8 SPECIAL EDITION......One word sums up the Antares 8, and that word is space. With its large windows and opening translucent roof, the wheelhouse gives you a panoramic view of the entire horizon. Above decks, the Antares 8 offers you an equally generous cockpit that can be personalised to suit your needs.

  • Beneteau Powerboat semi-planing hull. Design by Sarrazin Design
  • Space: large living space in the wheelhouse (2.48m wide x 2m long)
  • Large triple-function, easy to handle saloon:
  • saloon (face-to-face)
  • co-pilot bench (facing the sea)
  • double berth (2m x 1.2m)
  • Very light and airy via opening roof
  • Cockpit that can be personalised (4 layout)
  • Beachable

Beneteau_Antares_8

Naval Architect Beneteau Powerboat
Boat Designer Sarrazin Design
Length Overall 8.36 m.
Hull Length 7.48 m.
Hull Beam 2.95 m.
Max. Engine Power 200 CV
Fuel Capacity 300 L.
Water Capacity 100 L.
Dry Weight 3000 Kg approx.
Draught 0.70 m.
Air Draught 2.60 m.
CE Certification C8 requested

DESIGN

The Antares 8, a true cruising launch, is the first model in the Antares range to offer a huge wheelhouse living space.
The modular saloon can be converted into a large berth or a co-pilot bench. The helm station with co-pilot bench allows three persons to follow the course in comfort.The practical and fitted galley is located opposite the saloon. All this large living space, protected by the wheelhouse, looks out over the sea.The wide wheelhouse windows provide a panoramic view of the horizon.

The sky is visible from the saloon through the translucent opening roof (option). Down below a spacious head compartment together with a separate owner’s cabin complete this accommodation designed for cruising with four persons on board.

Outside, the Antarès 8 offers a huge cockpit that can be personalised. Whether you enjoy fishing parties or comfortable cruising, the Antarès 8 satisfies your desires: uncluttered cockpit, fishing equipment, cockpit saloon that converts to a sunbathing area, bathing platform (options).

HULL
The hull is of sandwich construction: better stiffness/weight ratio, optimum sound and thermal insulation – white gel coat – Laminated GRP inner hull moulding: structural role – perfect stiffness – better finish to the accommodation – easy maintenance – Semi-planing hull with deep V. The keel allows beaching (propeller protection and beaching legs available as options).

DECK
The deck is of sandwich construction:
better stiffness/weight ratio, optimum sound and thermal insulation - white gel coat – Integral laminated GRP inner deck moulding: perfect stiffness – better finish to deckheads – easy maintenance – ‘Diamond point’ nonslip surface in areas of work and movement around the boat – White PVC protective rubbing strake on hull/deck

 

The all new Barracuda Fisher from Beneteau. Due to be launched at the Autumn Boat Shows and present at Southampton

Seaworthy and powerful, the Barracuda 9 is the first born of a completely new range of motorboats devoted to keen fishers, who do not wish to sacrifice comfort, speed and conviviality for the sake of their passion. Air-step hull, tulip-shaped bow, spacious and stylish wheelhouse, deck plan intelligently designed: this outboard can perform at a top speed of 40 knots and will develop all sport fishing standards.
Beneteau_Barracuda

Naval Architect Beneteau Power Boats
Boat Designer Beneteau Power Boats
Length Overall 8,78 m
Hull Length 7,98 m
Hull Beam 2,98 m
Max. Engine Power 400 CV
Fuel Capacity 400 L
Water Capacity 100 L
Draught 0,80 m / 0,50 m
Air Draught 2,51 m / 2,96 m (avec fly)
CE Certification C10
Light Displacement 2800

HULL

Technology Air Step® Patent Beneteau Composition:

  • Polyester sandwich
  • White hull
  • Hull counter moulding completely laminated in polyester
  • Floating lower hull with extended V bow

DECK

Composition:

  • Polyester sandwich
  • Surfaces with diamond-tip type non-slip covering
  • White gel coat
  • Part deck counter moulding at forward peak laminated in polyester

 

Completing the Antares Outboard range, the Antares 8.80 is really innovative, with large volumes plus the comfort of a cruising unit, and the performances plus easy maintenance of an outboard engine.

Life on board is particularly comfortable and the volume inside is remarkable with a large saloon, a galley, an owners cabin, a bathroom and a second cabin! The outside cockpit is variable and offers flexibility for each activity : cruising, fishing or relaxing time. Thanks to the single 250 hp outboard engine or the 2x150

  • Single or twin engines (250hp or 2x 150hp)
  • 30 knots maximum, 23 knots cruising speed
  • Bow thruster (option) for easier manoeuvring
  • Air Step
  • Panoramic U-shaped saloon for 4 persons
  • 6 berths
    Beneteau_Antares_8.8
Length Overall 8,78
Hull Length 7,98
Hull Beam 2,98
Max. Engine Power 300
Fuel Capacity 400
Water Capacity 100
Draught 0,50/0,80
Air Draught 2,55
CE Certification C8 requested
Light Displacement 2800

BENETEAU asserts its leadership in the power market with a major innovation within its ANTARES range. With the ANTARES 8.80, BENETEAU unites the best of both the cruising and outboard worlds. This innovative concept gives the ANTARES 8.80 unique advantages for a boat of this size:

  • outstanding spaciousness for a 8 metre hull,
  • high performance for a 8 metre cruiser,
  • simple use and maintenance,
  • reduced purchasing budget.

The ANTARES 8.80 is most of all a cruiser: life on board is comfortable with a very large saloon (the table and U shaped seat cater for as many as 6 people!) and a real kitchen with worktop.

The owner cabin boasts a good size double bed (1.98 m X 1.50 m), with a separate bathroom, but what is even more surprising is the presence of a second cabin, for children or guests, with a 140cm wide berth. This is how BENETEAU solves the sleeping– and on board accommodation dilemma of an increasing number of young families longing for their first cruising experience!

The boat cruising speed is 23-25 knots, with a maximum of 30 knots. The ANTARES 8.80 is available in single (250 HP) or twin-engine (2 x 150 HP) version. In addition to this high performance motorisation, the ANTARES 8.80 is the first ANTARES to benefit from a AIR STEP® hull: boat performance, manoeuvrability and stability are a world apart from a classic hull and the sensations just unparalleled. Thanks to the AIR STEP® hull, the Antares 8.80 has lower fuel consumption, enjoys faster accelerations and is very steady on the water, even through waves. Passengers will also appreciate the comfort of the AIR STEP® « air cushion » and the smooth turnhandling.

Life aboard this 8 metre long boat is even more enjoyable thanks to the interior brightness. Every part of the boat is fitted with light wells : two large window panels in the hull bathe the owner cabin in natural light. Ventilation is made possible through two porthole openings in these panels. Finally, light floods into the wheelhouse through two sunroofs (sliding panels) and side windows: they create an amazing panoramic sea view!

 

The NEW Antares 7.80 by Sarrazin Design introduces a new and very contemporary sporting line into the Antares outboard range.

The layout of this new Antares outboard makes it a great boat for entering the world of coastal cruising, with a saloon boasting all-round views, berths for four, galley area, head/storage compartment, opening roof, cockpit lounge and sunbathing platform and outboard propulsion.
Beneteau_Antares_780

  • outboard propulsion
  • all-round views
  • berths for four
  • opening roof
  • sunbathing
  • platform
Naval Architect Beneteau Power Boats
Boat Designer Sarrazin Design
Length Overall 7,23 m
Hull Length 6,97 m
Hull Beam 2,78 m
Max. Engine Power
Fuel Capacity 200L
Water Capacity 100 L
Dry Weight 2000 kg
CE Certification C8/D8

HULL

Composition: Monolithic laminate (Polyester resin - Glass fibre) - Hull counter moulding completely laminated in polyester - White gel-coat - Semi-floating hull with accentuated V-shaped bow: Stability and high performance in choppy seas -

DECK

Composition: Sandwich - Surfaces with Diamond tip type nonslip covering - White gel-coat - Integral cabin and toilet hull counter moulding - White PVC sheer rail guard along the hulldeck join -

The Antares 750 HB

The Antares 7.50 HB by Sarrazin Design introduces a new and very contemporary sporting line into the Antares outboard range.

Onboard comfort and functionality

The layout of this new Antares outboard makes it a great boat for entering the world of coastal cruising, with a saloon boasting all-round views, berths for four, galley area, head/storage compartment, opening roof, cockpit lounge and sunbathing platform and outboard propulsion.
Beneteau_Antares_750HB

A great boat for coastal cruising, relaxing, fishing and water sports with family and friends.

  • outboard propulsion
  • all-round views
  • berths for four
  • opening roof
  • sunbathing
  • platform
Naval Architect BENETEAU POWER BOATS
Boat Designer SARRAZIN DESIGN
Length Overall 7.23 m
Hull Length 6.97 m
Hull Beam 2.84 m
Max. Engine Power 110 kw / 150 HP
Fuel Capacity 200
Water Capacity 100
Draught 0.60 / 0.80 m
Air Draught 2.23 m
CE Certification C8 / D8 required
Light Displacement

HULL

Composition: Monolithic laminate (Polyester resin - Glass fibre) - Hull counter moulding completely laminated in polyester - White gel-coat - Semi-floating hull with accentuated V-shaped bow: Stability and high performance in choppy seas -

DECK

Composition: Sandwich - Surfaces with Diamond tip type nonslip covering - White gel-coat - Integral cabin and toilet hull counter moulding - White PVC sheer rail guard along the hulldeck join -

 

Along the same lines as the new Beneteau Antares out board : 5.80 and 7.50, the Antares 6.80 perfectly replaces the Antares 650 : more living space and more comfort on board with its 3 leafs window, more performance with a new certified hull up to 115 hp.

  • More living space
  • Additional comfort
  • Improved performance
  • Optional electric windlass
  • Wide 3-panel glazed aft door
  • Proven interior design
  • two distinct areas
  • Versatile cockpit saloon

beneteau-antares-680

Naval Architect BENETEAU POWER BOATS
Boat Designer SARRAZIN DESIGN
Length Overall 6.72 m
Hull Length 6.40 m
Hull Beam 2.54 m
Max. Engine Power 115 hp
Fuel Capacity 135 l
Water Capacity 20 l
Draught 0.53 m
Air Draught 2.20 m
CE Certification C7 / D7
Light Displacement 1 250 kg

 

HULL
Composition: Polyester - Injection moulded hull - White gel coat - Winching ring on bow - Floating hull -

DECK
Composition: Polyester sandwich (High density foam core) - White gel coat - Partial deck counter-mould - Grey protection rail on the hull-deck joint -

ENGINE: (OPTIONS)
This boat is available in Suzuky 4T 85kw (115hp) single outboard version with TL-type shaft length - Combustion filter with decanter - 1 Battery for engine 12V-110

OTHER AVAILABLE OPTIONS

  • Electric windlass M/D 700W
  • Wheelhouse hood DUNE
  • Square cockpit convertible to sunbathing
  • Cockpit rear closing cover DUNE
  • Chemical toilet
  • Pre rigging Suzuki 4T 40-115 HP
  • Pre rigging Yamaha 4T 90-115 HP

 

 

This family of small outboard-powered wheelhouse cruisers just keeps on growing. Hot on the heels of the 7.50 HB launched last winter, here comes the Antares 5.80 outboard as a replacement for the 6.20 HB.

This range-entry model (alongside the 6.50 HB and 7.50 HB) offers a serious alternative to the Open hull by delivering the greater comfort and accommodation required for year-round enjoyment.

Above all its an Antares : With a hull designed by the BENETEAU design team and the overall look created by Sarrazin Design, the Antares 5.80 Outboard offers all the famous Antares features.
Beneteau Antares 580

  • The cockpit is simple, but functional
  • On deck, the port side deck is wider for ease of access.
  • The opening hatch in the wheelhouse roof provides excellent ventilation.
  • The ergonomic helm station with drivers seat
  • Behind the drivers seat is a galley area featuring a sink and a small hob.
  • The bow compartment features a double berth and storage space.

HULL

Composition: Polyester - Injection moulded hull - White gel-coat - Winching ring on bow - Floating hull -

DECK

Composition: Polyester sandwich (Core in high density foam) - White gel-coat -

The irresistible range-entry Beneteau Antares model

This family of small outboard-powered wheelhouse cruisers just keeps on growing. Hot on the heels of the 7.50 HB launched last winter, here comes the Antares 5.80 outboard as a replacement for the 6.20 HB. This range-entry model (alongside the 6.50 HB and 7.50 HB) offers a serious alternative to the Open hull by delivering the greater comfort and accommodation required for year-round enjoyment.

Above all… it’s an Antares

With a hull designed by the BENETEAU design team and the overall look created by Sarrazin Design, the Antares 5.80 Outboard offers all the famous Antares features:

  • a deep, modular cockpit for fishing and cruising
  • lots of room to move around the boat safely and plenty of grab rails in all the right places
  • sliding wheelhouse door
  • extremely seaworthy hull
  • The Outboard propulsion (up to 100 HP) delivers high performance with sharp handling, and makes the boat easy to transport and launch.
  1. Outside: safety and functionality
    The cockpit is simple, but functional: the bench seat has removable sections to create more space and a backrest hinged to allow for lifting the outboard engine.
    On deck, the port side deck is wider for ease of access. The opening hatch in the wheelhouse roof provides excellent ventilation.
  2. Inside: safety and functionality
    The ergonomic helm station with driver’s seat, instrument panel, compass and sport steering wheel is to starboard. Behind the driver’s seat is a galley area featuring a sink with manual water pump and a small hob. To port, the saloon offers a table and two facing seats. The bow compartment features a double berth and storage space.

Key specifications:

  • Design by Sarrazin Design
  • Hull designed by the BENETEAU design team