Invincible Boats

The Invincible 42' Open Fisherman

Alex Lipworth created Invincible Boats to design a fishing tournament vessel that could live up to the wear and tear of the sport while providing the basic necessities every fisherman needs. The designs were first created by naval architect Michael Peters. The idea was to take out all the extras consumers would not normally need on a fishing boat and replace those features with designs that made fishing all the easier. The result was the 42’ Cuddy, 33’ Open and 36’ Open Fisherman. Invincible has taken out the pulpits and gunwales. Two live wells are placed under the deck with optional on deck chest wells. Decks are cleared and designed for fighting fish. Invincible Boats calls South Florida home, but dealers can be located along the eastern sea board of the United States. Used prices for Invincible Boats range from $115,000 US to $249,000 US.

While most companies, including Invincible Boats, do not release prices for new builds, one listing was found online for $249,000 US. The model was a 2010 Open Center Console custom build. Invincible Boat offers a complete list of standard and optional features on the official website as well as a brochure the consumer can download for more information.

 INVINCIBLE_42

The fastest Center Console in the market available to you today!!!!

She features, Fiberglass Hard T Top, all aluminum is powder coated, rear bench seat, towing eye, huge baitwell, huge livewell, saltwater wash down, fresh water washdown, electric head, and many more options!!!!!

This boat runs at 76 MPH powered by triple 300 Mercury Verado Engines. The speed is GPS measured!!!

You must sea trial this boat to believe it!!!!

The unique hull was designed by a renowned naval architect Michael Peters. This is a one of a kind hull design; not only is the boat stepped but she offers a remarkable tunnel that is fed air by the steps. The tunnel gives the boat a better ride and increased speed over conventional stepped hulls.

STANDARD FEATURES

  • Corecell vacuum bagged hull 
  • 100% vinylester resin-hull NO WOOD
  • Stainless pop up cleats
  • Hydraulic steering
  • 1 Baitwell in Transom with Rule 1500 gph pump
  • 1 Baitwells in Deck with Rule 1500 gph pump
  • Salt water washdown
  • High speed pickup for livewells and washdown
  • 4 gunwale rod holders
  • Hi performance K Plane trim tabs
  • Tin copper wiring-all heat shrunk ends
  • Two deep fish boxes 600 quart and 720 quart
  • Diamond non skid throughout the cap and deck
  • Molded reinforced stringer grid system
  • Heavy duty rub rail
  • Forward anchor locker with hanging anchor support
  • Deluxe console with completely lined & finished interior (has room for a head) 
  • Lockable recessed electronic panel (folds away when not in use)
  • Waterproof switches and breaker panel
  • Recessed bow handrail
  • Oversized compass
  • One series 31 Gel Cell battery per engine (with aluminum battery boxes) 
  • All navigational lights
  • Self bailing cockpit
  • Molded hatches with O rings
  • 320 gallons of fuel STANDARD
  • Under gunwale lights
  • Gem Lux stainless thru hulls
  • Multi-ball valves (allows engines to run off more than 1 fuel tank)
  • (3) 2000 GPH Rule Bilge pumps
  • Aluminum Tilt steering wheel with speed knob
  • Stainless D rings
Specifications
Length Overall (including motors): 45'1"
Length Overall (hull only): 42'9"
Beam Overall: 11'7"
Displacement (1/2 load): 14,600 lbs
Standard Fuel Capacity: 600 gallons
Horsepower Outboard: Maximum 1600 HP
Draft (hull only, full load): 2'1"
 

 
Notable Standard Equipment
Saltwater Washdown
Livewell in Floor
Livewell in Transom
Four Large Fish Boxes
Completely Finished Inside Console
Molded Stringer System
Cored Hull and Vaccuum Bagged

The Invincible 36' Open Fisherman stands in a class by itself. The hull is constructed with the finest grade materials that include Corecell, the best core material available. The boat has been vacuum bagged to keep it light, yet strong. Every inch of this boat from stem to stern has been thought-out to keep her balanced and efficient.

The unique hull was designed by renowned naval architect Michael Peters. This is a one of a kind hull design; not only is the boat stepped but she offers a remarkable tunnel that is fed air by the steps. The tunnel gives the boat a better ride, increased speed and better fuel economy over conventional stepped hulls. At 50mph burning 33 gph, the boat is unequalled.

All the plugs and molds for the boat are comprised of a molded grid stringer system; this gives the boat more strength as the boats’ bulkheads and stringers are in one large mold instead of joining each of the pieces together. The stringers and bulkheads are larger and stronger than the competitions and even taper from the top to the bottom to increase strength.

The Invincible 36' has been meticulously scrutinized by tournament anglers so that every possible item has a reason and purpose for being there. These boats are designed to be fished hard and make long distance runs in weather that other fishermen would stay home in. The large bow and exaggerated flair keep everyone in the boat dry without giving up comfort.

 The_Invincible_36_Open_Fisherman

Available with 350 Verado's, 350 Yamaha's, 300 Suzuki's, 300 Evinrude, you pick! Custom order your boat with a variety of options including different leaning posts, forward seating, live wells, fuel, etc. We will add and custom option to build you your perfect boat!

 

There isn't a fisherman out there that thinks a perfect boat exists--until now. The best riding, driest, and fastest boat in it's class. The INVINCIBLE is a true tournament boat that sets a new standard in the industry. The entire hull of the INVINCIBLE 36 is constructed with E glass, Corecell Structural Core Material, and Vinylester Resin. The transom, hull sides and bottom are all vacuum bagged. The entire lamination and bonding process used to construct the INVINCIBLE 36 is state of the art and unequaled in the fishing industry. The liner and deck fit to within 3/8 inch tolerances and are both attached to the hull using Weld-On, a methacrylate adhesive which guarantees that the laminate will tear before the adhesive bond breaks. The center console is glassed to the liner as well as being thru bolted using 1/4 aluminum backing plates on all four sides of the liner. All molds for the boat have been made on a 5 axis computer router. As a result, all parts for the boat fit perfectly. This ensures a well finished boat where parts are easily bonded together to create a fishing boat whose strength, rigidity, and finish cannot be equaled.STANDARD FEATURES

  • Corecell vacuum bagged hull 
  • 100% vinylester resin-hull NO WOOD
  • Stainless pop up cleats
  • Hydraulic steering
  • 1 Baitwell in Transom with Rule 1500 gph pump
  • 1 Baitwells in Deck with Rule 1500 gph pump
  • Salt water washdown
  • High speed pickup for livewells and washdown
  • 4 gunwale rod holders
  • Hi performance K Plane trim tabs
  • Tin copper wiring-all heat shrunk ends
  • Two deep fish boxes 600 quart and 720 quart
  • Diamond non skid throughout the cap and deck
  • Molded reinforced stringer grid system
  • Heavy duty rub rail
  • Forward anchor locker with hanging anchor support
  • Deluxe console with completely lined & finished interior (has room for a head) 
  • Lockable recessed electronic panel (folds away when not in use)
  • Waterproof switches and breaker panel
  • Recessed bow handrail
  • Oversized compass
  • One series 31 Gel Cell battery per engine (with aluminum battery boxes) 
  • All navigational lights
  • Self bailing cockpit
  • Molded hatches with O rings
  • 320 gallons of fuel STANDARD
  • Under gunwale lights
  • Gem Lux stainless thru hulls
  • Multi-ball valves (allows engines to run off more than 1 fuel tank)
  • (3) 2000 GPH Rule Bilge pumps
  • Aluminum Tilt steering wheel with speed knob
  • Stainless D rings
Specifications
Length Overall - 36' 8"
Beam - 10'
Deadrise at Transom - 22 Degrees
Weight - 9,200lbs. (w/power)
Maximum Fuel Capacity - 475 gallons
Horsepower Outboard - 1000hp
Speed 70+ MPH

Notable Standard Equipment
Saltwater Washdown
Livewell in Floor - 60 gallons
Livewell in Transom - 50 gallons
Four Large Fish Boxes
Completely Finished Inside Console
Molded Stringer System
Cored Hull and Vaccuum Bagged

The Invincible 33' is a completely new 33 foot center console that is designed by renowned naval architect Michael Peters. All molds and parts for the boat have been manufactured by Marine Concepts on a computerized 5 axis CNC. This boat is not stretched, cut, or copied from any other existing boats. It is a brand new boat.

This boat is designed to run on twin engines faster and more economically than similar boats with TRIPLE engines! It’s multi-step, ventilated hull provides a ride that is unmatched. The boat will achieve higher speeds than 65 mph with twins. This is something that has never been achieved on such a large fishing boat until now.

If you’re looking for a fast, dry twin engine rig that will run with the big boys, this is your boat. This is truly a serious high performance fishing machine.

 invincible_33_powerboat

STANDARD FEATURES

  • Corecell vacuum bagged hull 
  • 100% vinylester resin-hull NO WOOD
  • Stainless pop up cleats
  • Hydraulic steering
  • 1 Baitwell in Transom with Rule 1500 gph pump
  • 1 Baitwells in Deck with Rule 1500 gph pump
  • Salt water washdown
  • High speed pickup for livewells and washdown
  • 4 gunwale rod holders
  • Hi performance K Plane trim tabs
  • Tin copper wiring-all heat shrunk ends
  • Two deep fish boxes 600 quart and 720 quart
  • Diamond non skid throughout the cap and deck
  • Molded reinforced stringer grid system
  • Heavy duty rub rail
  • Forward anchor locker with hanging anchor support
  • Deluxe console with completely lined & finished interior (has room for a head) 
  • Lockable recessed electronic panel (folds away when not in use)
  • Waterproof switches and breaker panel
  • Recessed bow handrail
  • Oversized compass
  • One series 31 Gel Cell battery per engine (with aluminum battery boxes) 
  • All navigational lights
  • Self bailing cockpit
  • Molded hatches with O rings
  • 320 gallons of fuel STANDARD
  • Under gunwale lights
  • Gem Lux stainless thru hulls
  • Multi-ball valves (allows engines to run off more than 1 fuel tank)
  • (3) 2000 GPH Rule Bilge pumps
  • Aluminum Tilt steering wheel with speed knob
  • Stainless D rings
Specifications
Length Overall - 32' 10 "
Beam - 9.7'
Deadrise at Transom - 22 Degrees
Weight - 8,100lbs. (w/power)
Maximum Fuel Capacity - 300 gallons
Horsepower Outboard - 700hp
Speed 65+ MPH

Notable Standard Equipment
Saltwater Washdown
Livewell in Floor - 60 gallons
Livewell in Transom - 50 gallons
Four Large Fish Boxes
Completely Finished Inside Console
Molded Stringer System