Perfectly designed to take full advantage of sea and sun, these three new boats on the Beneteau Flyer 550 Sun Deck Power Boat combine taut and elegant lines designed by Pierangelo Andreani with a particularly high performance hull. Let yourself be carried away!

Even the most compact is already surprisingly spacious, with a large cockpit, proper sunbathing platform and ergonomic helm position. The sea is at your command.

• Planing hull, stable and fast
• Increased performance with 115 HP engine
• Space worthy of a 6m boat due to the aft bench position
• Wide cockpit bench capable of seating 4 persons
• Ergonomic, comfortable helm position capable of taking 2 persons
• Large forward sunbathing platform
• Cabin: large amount of stowage space and easy access through the sliding door
• Trailerable

Beneteau Flyer 550 Sun Deck Power Boat Construction -
Composition: GRP and additional foam buoyancy. White hull.
Winching eyebolt on bow.

Beneteau Flyer 550 Sun Deck Power Boat Deck -
Composition: GRP Sandwich with high density Airex foam core.
Stainless steel open pulpit.
Aluminium bow roller fitting.
Self-draining anchor well with closing hatch.
Eyebolt for attaching bitter end.

The two new FLYER Cabrios with their fast hulls allow day trips or coastal cruising sheltered from the wind and spray behind an elegantly shaped glass windscreen. Pierangelo Andreanis deck design shows a sporty temperament, which will not escape the notice of water sports afficionados

• Large comfortable cockpit:
• Wide protected sunbathing platform
• Large practical cockpit:
• Sprayhood stowage built-in to transom
• Removable cushions and backrests for over-wintering
• 2 stowage lockers in bench seats
• Versatile anchoring and boarding:
• A proper cabin for coastal cruising
• Double berth

Glamorous and sporty!

The two new FLYER Cabrios with their fast hulls allow day trips or coastal cruising sheltered from the wind and spray behind an elegantly shaped glass windscreen. Pierangelo Andreani’s deck design shows a sporty temperament, which will not escape the notice of water sports’ afficionados.

Generous cockpit

The feeling of comfort combined with the protection of the all-round windscreen is further emphasised by a surprisingly spacious cockpit. The seats with cushions, backrests and headrests (six in the Flyer 550 Cabrio, seven in the 650 Cabrio) form a semicircle around the double-seat helm position.

Be even more sociable, the Flyer 650 Cabrio also gives the benefit of an exterior galley.

FLYER 550 CABRIO

Length overall: 5.35m
Hull length: 5.21m
Hull beam: 2.34m
Light displacement: 1,030 kg
Draught: 0.2 / 0.6m
Fuel capacity: 100L

Fresh water capacity: 0L Maximum recommended engine size: 115HP
Navigation categories requested : C6/D6
Night space in the cabin and cockpit

With their double berth sleeping cabin forward and their convertible cockpit, these two new Flyer Cabrios increase the choice of sailing activities. Very easy to install, the cabriolet hood gives builtin protection allowing two additional people to be accommodated for the night.

Principal features:

• Large, comfortable cockpit:
• 6 seats with cushions, backrests and headrests for the Flyer 550 Cabrio/ 7 for the Flyer 650 Cabrio
• Driver’s seat with bolster function (sitting/ standing)
• Tilting backrest/ lounger (Flyer 550 Cabrio); co-driver’s seat/ sunbed (Flyer 650 Cabrio)
• Excellent protection by means of a wide windscreen surrounding the cockpit
• Built-in protection with the cabriolet hood (very easy to install)
• Practical cockpit:
• Hood stowage built into transom
• Removable cushions and backrests
• Two stowage lockers in bench seats
• Flexibility when anchoring and boarding:
• Anchor from bow/stern (flexibility of two anchor wells)
• Boarding access forward and aft

On the Flyer 650 Cabrio:
The same features as the FLYER 550 Cabrio with, in addition:

• Wide, protected sunbathing platform in cockpit
• Real cabin:
• Double berth (Trajan Sand upholstery- Optional)
• For coastal cruising:- Pressurised fresh water + refrigerator (option) + hob (optional)

Water sports enthusiasts as well as those just wanting relaxation will love the performance of this outboard model, which claims to offer exceptional and innovative comfort across all types of sailing ground, whether sheltered, windy or very sunny. Or perhaps the retro charm and sportiness of its refined lines alone will be enough to win their hearts. Designed by Pierangelo Andréani, this sleek streamlined design is aimed at day-boating for water sports activities or trips to an anchorage, bathing, relaxing and the joy of sailing.

• Airt Step Hull
• Large comfortable cockpit:
• Wide protected sunbathing platform
• Sprayhood stowage built-in to transom
• Removable cushions and backrests for over-wintering
• A proper cabin for coastal cruising
• Double berth

The Antares 42 will be previewed at the Paris and London Boat Show. An Antares has never offered such a large living space ! Designed for cruising with the family, the Antares 42 offers with vis-a-vis, large Flybridge, 2 cabins, 2 washrooms, a convertible saloon for 6 berths on one of the most efficient hull on the market.

• Large living space
• Designed for cruising with the family
• Larger volume : saloon
• A convertible saloon for 6 berths
• Most efficient hull on the market
• Performance: speed versus fuel consumption
• Wheelhouse size and brightness
• very large convertible saloon
• 3-panel glazed door
• Owners cabin shower

HULL
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - White gel coat - Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fibre) - Profile: Semi-floating lower hull with bell V bow - Side stabiliser skids -

DECK
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - Structural counter moulding in monolithic laminate - Composition: (Polyester resin - Glass fibre) - White gel coat - Diamond tip type non-slip covering -

OPTIONS
PACKS ELECTRONIC

• Digital radar 4 Kw • Receiver AIS
• VHF Double station

 

OTHER OPTIONS

• Woodwork Alpi Mahogany “Grand Brillant” • Complete mooring kit
• Aft cockpit closing Dune • Console cover Fly
• Bimini top Flying bridge • Cockpit wheelhouse cover Dune
• Hydraulic gangplank Stainless steel • White outside wheelhouse curtains
• Pump for deck washing (Sea water) • Shore freshwater supply
• Generator 9,5 KVA 220V/50HZ ONAN • Ice maker Cockpit 220V
• Air conditioning 220V • Forced air heating fuel
• Carpet AURAY • Rigid reserve WC 50L Drain Deck/Sea grav.
• tarboard forward • Quiet Flush electric toilet Port forward
• White and steel blue hull • TV aerial
• Television LCD 20’’ + DVD and MP3 player in master cabin
• Television LCD 20’’ + DVD/MP3 player in the saloon
• Fully electric kitchen 220V (Ceramic hob + Microwave oven/ Grill)
• Solid wood decked catwalks

The Antares 36 inaugurates the new generation of large Antares with the keywords more space, and more comfort.

The first powerboat to offer a large complete flybridge (driving position + saloon + sunbathing platform).

The first powerboat to offer 2 double berth cabins.

• Greater living space - Large flybridge (dimensions same as Antares 12 flybridge)
• Large L-shaped galley opposite saloon
• Removable saloon seats
• Practical layout
• Ample stowage (under saloon and driver benches)
• Wide access hatches to technical areas (engine plumbing electricity)
• Sliding door to owners cabin
• Heads with separate shower andWC compartments

HULL

• Composition: Sandwich (Polyester resin Glass fibre / Balsa core)
• White gel-coat
• Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fibre)
• Profile: Semi-floating lower hull with bell V bow - Side stabiliser skids -

DECK
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - Part counter moulding structure in monolithic laminate (Polyester resin - Glass fibre) - White gel-coat - Diamond tip type non-slip surface - Joining hull / deck with sheer rail aluminium and grey rubber -

• 11.37 m
• Beam: 3,88 m
• Draught: 0,9 m
• Displacement: 7 076 kg
• Water tank: 324 l
• Fuel tank: 650 l
• Engine: Volvo 2 x 260 HP
• Cabins: 2
• Berths: 4+1
• Toilets: 1

Perfectly designed to take full advantage of sea and sun, these three new boats on the Beneteau Flyer 650 Sun Deck Power Boat combine taut and elegant lines designed by Pierangelo Andreani with a particularly high performance hull. Let yourself be carried away! Even the most compact is already surprisingly spacious, with a large cockpit, proper sunbathing platform and ergonomic helm position. The sea is at your command.

• Stable and performance planing hull
• Trailerable
• Wide 5 / 6-seater cockpit bench
• Versatile cockpit for fishing or cruising
• Large sunbathing platform forward
• Choice of 2 drivers seats: Bolster function or Leaning post
• double berth

HULL

Composition: Polyester - Injection moulded hull - White gel-coat - Hull completely counter moulded - Composition: Polyester - Winching ring on bow -

DECK

Composition: Polyester sandwich - White gel-coat -

The Antares 32 is the first twin-engined Flybridge in the BENETEAU range, and delivers exceptional responsiveness and comfort at sea for exceptional responsiveness .

The twin-engined configuration provides much greater manoeuvrability in port and better balance underway. The model will make its first appearance at the Genoa Boat Show in October 2010, then Barcelona. Not Present at Paris or London

• First twin-engined Flybridge
• Exceptional responsiveness
• Twin Nannii T4-200
• First appearance at the Genoa Show Oct 2010

HULL Composition:

• Sandwich (Polyester resin - Glass fiber / Balsa core)
• 'white gel coat
• Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fiber) Profile:
• Semi-floating lower hull with bell V bow
• Side stabiliser skids

DECK Composition:

• Sandwich (Polyester resin - Glass fiber / Balsa core)
• Part counter moulding structure in monolithic laminate (Polyester resin - Glass fiber)
• White gel coat
• Diamond tip type non-slip covering
• Joining hull / deck with sheer rail aluminium and grey rubber

From this year onwards, all Antares models over 9 metres will have their length in feet included as part of their model name. And that�s the case with this new launch, which replaces and upgrades the 9 Series with 3 Flybridge/Hard Top versions. As the first Flybridge in the range, it is designed primarily for cruising, and retains all the excellent seakeeping qualities on which the Antares reputation has been built.

Sarrazin Design is famous for sleek elegance of line, and their style is unmistakable in this Antares 30. Its grey-tinted glass makes a special contribution to this sophisticatedly-modern design. The hull is the work of the Beneteau design team, and is available in single-engine configuration only.

There are three versions to choose from:
Without flybridge: the Antares 30 S version with two opening hard top panels With flybridge, but without helm station: large sunbathing area and cockpit table on the flybridge With flybridge and helm station convertible to a sunbathing platform

• The convenient transom skirt and ladder make for easy access.
• Comfortable sunbathing platform (optional).
• Comfortable saloon arranged
• The double control panel
• Wheelhouse is large and bright for all-round vision at sea.
• The saloon converts to accommodate a double
• The owners bow cabin offers a central bed measuring

From this year onwards, all Antares models over 9 metres will have their length in feet included as part of their model name. And that’s the case with this new launch, which replaces the 9 Series with 30 Flybridge/Hard Top versions.

As the first Flybridge in the range, it is designed primarily for cruising, and retains all the excellent sea keeping qualities on which the Antares reputation has been built. Sarrazin Design presents a sleek elegant line, and their style is unmistakable for the Antares 30. Its grey-tinted glass makes a special contribution to the sophisticated modern looks.

The hull is the work of the Beneteau design team, and is available AT THE MOMENT with a single-engine configuration only.

There will be three versions to choose from the 30 Antares.

The S version is with hard top with two opening panels, with flybridge but no helm station featuring a large sunbathing area and settee with table up top, and with flybridge and helm station convertible to a sunbathing platform. According to Beneteau the amount of living space is unrivalled by any other boat of this size. Accommodation is a four berth lower deck with a convertible saloon to double berth. The guest cabins are an owners double to fore, and a double bunk to port. To starboard is the fully equipped head.

Beneteau Antares 30  will have max single engine power up to 380hp, and will be certified to CE B standards.

NOW AVAILABLE AS THE 8 SPECIAL EDITION......One word sums up the Antares 8, and that word is space. With its large windows and opening translucent roof, the wheelhouse gives you a panoramic view of the entire horizon. Above decks, the Antares 8 offers you an equally generous cockpit that can be personalised to suit your needs.

• Beneteau Powerboat semi-planing hull. Design by Sarrazin Design
• Space: large living space in the wheelhouse (2.48m wide x 2m long)
• Large triple-function, easy to handle saloon:
• saloon (face-to-face)
• co-pilot bench (facing the sea)
• double berth (2m x 1.2m)
• Very light and airy via opening roof
• Cockpit that can be personalised (4 layout)
• Beachable

DESIGN

The Antares 8, a true cruising launch, is the first model in the Antares range to offer a huge wheelhouse living space.
The modular saloon can be converted into a large berth or a co-pilot bench. The helm station with co-pilot bench allows three persons to follow the course in comfort.The practical and fitted galley is located opposite the saloon. All this large living space, protected by the wheelhouse, looks out over the sea.The wide wheelhouse windows provide a panoramic view of the horizon.

The sky is visible from the saloon through the translucent opening roof (option). Down below a spacious head compartment together with a separate owner’s cabin complete this accommodation designed for cruising with four persons on board.

Outside, the Antarès 8 offers a huge cockpit that can be personalised. Whether you enjoy fishing parties or comfortable cruising, the Antarès 8 satisfies your desires: uncluttered cockpit, fishing equipment, cockpit saloon that converts to a sunbathing area, bathing platform (options).

HULL
The hull is of sandwich construction: better stiffness/weight ratio, optimum sound and thermal insulation – white gel coat – Laminated GRP inner hull moulding: structural role – perfect stiffness – better finish to the accommodation – easy maintenance – Semi-planing hull with deep V. The keel allows beaching (propeller protection and beaching legs available as options).

DECK
The deck is of sandwich construction:
better stiffness/weight ratio, optimum sound and thermal insulation - white gel coat – Integral laminated GRP inner deck moulding: perfect stiffness – better finish to deckheads – easy maintenance – ‘Diamond point’ nonslip surface in areas of work and movement around the boat – White PVC protective rubbing strake on hull/deck

The all new Barracuda Fisher from Beneteau. Due to be launched at the Autumn Boat Shows and present at Southampton

Seaworthy and powerful, the Barracuda 9 is the first born of a completely new range of motorboats devoted to keen fishers, who do not wish to sacrifice comfort, speed and conviviality for the sake of their passion. Air-step hull, tulip-shaped bow, spacious and stylish wheelhouse, deck plan intelligently designed: this outboard can perform at a top speed of 40 knots and will develop all sport fishing standards.

HULL

Technology Air Step® Patent Beneteau Composition:

• Polyester sandwich
• White hull
• Hull counter moulding completely laminated in polyester
• Floating lower hull with extended V bow

DECK

Composition:

• Polyester sandwich
• Surfaces with diamond-tip type non-slip covering
• White gel coat
• Part deck counter moulding at forward peak laminated in polyester