Tuesday, 20 September 2011 10:35

Invincible Boats 42' Open Fisherman

The Invincible 42' Open Fisherman

Alex Lipworth created Invincible Boats to design a fishing tournament vessel that could live up to the wear and tear of the sport while providing the basic necessities every fisherman needs. The designs were first created by naval architect Michael Peters. The idea was to take out all the extras consumers would not normally need on a fishing boat and replace those features with designs that made fishing all the easier. The result was the 42’ Cuddy, 33’ Open and 36’ Open Fisherman. Invincible has taken out the pulpits and gunwales. Two live wells are placed under the deck with optional on deck chest wells. Decks are cleared and designed for fighting fish. Invincible Boats calls South Florida home, but dealers can be located along the eastern sea board of the United States. Used prices for Invincible Boats range from $115,000 US to $249,000 US.

While most companies, including Invincible Boats, do not release prices for new builds, one listing was found online for $249,000 US. The model was a 2010 Open Center Console custom build. Invincible Boat offers a complete list of standard and optional features on the official website as well as a brochure the consumer can download for more information.

 INVINCIBLE_42

The fastest Center Console in the market available to you today!!!!

She features, Fiberglass Hard T Top, all aluminum is powder coated, rear bench seat, towing eye, huge baitwell, huge livewell, saltwater wash down, fresh water washdown, electric head, and many more options!!!!!

This boat runs at 76 MPH powered by triple 300 Mercury Verado Engines. The speed is GPS measured!!!

You must sea trial this boat to believe it!!!!

The unique hull was designed by a renowned naval architect Michael Peters. This is a one of a kind hull design; not only is the boat stepped but she offers a remarkable tunnel that is fed air by the steps. The tunnel gives the boat a better ride and increased speed over conventional stepped hulls.

STANDARD FEATURES

  • Corecell vacuum bagged hull 
  • 100% vinylester resin-hull NO WOOD
  • Stainless pop up cleats
  • Hydraulic steering
  • 1 Baitwell in Transom with Rule 1500 gph pump
  • 1 Baitwells in Deck with Rule 1500 gph pump
  • Salt water washdown
  • High speed pickup for livewells and washdown
  • 4 gunwale rod holders
  • Hi performance K Plane trim tabs
  • Tin copper wiring-all heat shrunk ends
  • Two deep fish boxes 600 quart and 720 quart
  • Diamond non skid throughout the cap and deck
  • Molded reinforced stringer grid system
  • Heavy duty rub rail
  • Forward anchor locker with hanging anchor support
  • Deluxe console with completely lined & finished interior (has room for a head) 
  • Lockable recessed electronic panel (folds away when not in use)
  • Waterproof switches and breaker panel
  • Recessed bow handrail
  • Oversized compass
  • One series 31 Gel Cell battery per engine (with aluminum battery boxes) 
  • All navigational lights
  • Self bailing cockpit
  • Molded hatches with O rings
  • 320 gallons of fuel STANDARD
  • Under gunwale lights
  • Gem Lux stainless thru hulls
  • Multi-ball valves (allows engines to run off more than 1 fuel tank)
  • (3) 2000 GPH Rule Bilge pumps
  • Aluminum Tilt steering wheel with speed knob
  • Stainless D rings
Specifications
Length Overall (including motors): 45'1"
Length Overall (hull only): 42'9"
Beam Overall: 11'7"
Displacement (1/2 load): 14,600 lbs
Standard Fuel Capacity: 600 gallons
Horsepower Outboard: Maximum 1600 HP
Draft (hull only, full load): 2'1"
 

 
Notable Standard Equipment
Saltwater Washdown
Livewell in Floor
Livewell in Transom
Four Large Fish Boxes
Completely Finished Inside Console
Molded Stringer System
Cored Hull and Vaccuum Bagged
Published in Invincible Boats
Sunday, 18 September 2011 11:49

Invincible Boats 36' Open Fisherman

The Invincible 36' Open Fisherman stands in a class by itself. The hull is constructed with the finest grade materials that include Corecell, the best core material available. The boat has been vacuum bagged to keep it light, yet strong. Every inch of this boat from stem to stern has been thought-out to keep her balanced and efficient.

The unique hull was designed by renowned naval architect Michael Peters. This is a one of a kind hull design; not only is the boat stepped but she offers a remarkable tunnel that is fed air by the steps. The tunnel gives the boat a better ride, increased speed and better fuel economy over conventional stepped hulls. At 50mph burning 33 gph, the boat is unequalled.

All the plugs and molds for the boat are comprised of a molded grid stringer system; this gives the boat more strength as the boats’ bulkheads and stringers are in one large mold instead of joining each of the pieces together. The stringers and bulkheads are larger and stronger than the competitions and even taper from the top to the bottom to increase strength.

The Invincible 36' has been meticulously scrutinized by tournament anglers so that every possible item has a reason and purpose for being there. These boats are designed to be fished hard and make long distance runs in weather that other fishermen would stay home in. The large bow and exaggerated flair keep everyone in the boat dry without giving up comfort.

 The_Invincible_36_Open_Fisherman

Available with 350 Verado's, 350 Yamaha's, 300 Suzuki's, 300 Evinrude, you pick! Custom order your boat with a variety of options including different leaning posts, forward seating, live wells, fuel, etc. We will add and custom option to build you your perfect boat!

 

There isn't a fisherman out there that thinks a perfect boat exists--until now. The best riding, driest, and fastest boat in it's class. The INVINCIBLE is a true tournament boat that sets a new standard in the industry. The entire hull of the INVINCIBLE 36 is constructed with E glass, Corecell Structural Core Material, and Vinylester Resin. The transom, hull sides and bottom are all vacuum bagged. The entire lamination and bonding process used to construct the INVINCIBLE 36 is state of the art and unequaled in the fishing industry. The liner and deck fit to within 3/8 inch tolerances and are both attached to the hull using Weld-On, a methacrylate adhesive which guarantees that the laminate will tear before the adhesive bond breaks. The center console is glassed to the liner as well as being thru bolted using 1/4 aluminum backing plates on all four sides of the liner. All molds for the boat have been made on a 5 axis computer router. As a result, all parts for the boat fit perfectly. This ensures a well finished boat where parts are easily bonded together to create a fishing boat whose strength, rigidity, and finish cannot be equaled.STANDARD FEATURES

  • Corecell vacuum bagged hull 
  • 100% vinylester resin-hull NO WOOD
  • Stainless pop up cleats
  • Hydraulic steering
  • 1 Baitwell in Transom with Rule 1500 gph pump
  • 1 Baitwells in Deck with Rule 1500 gph pump
  • Salt water washdown
  • High speed pickup for livewells and washdown
  • 4 gunwale rod holders
  • Hi performance K Plane trim tabs
  • Tin copper wiring-all heat shrunk ends
  • Two deep fish boxes 600 quart and 720 quart
  • Diamond non skid throughout the cap and deck
  • Molded reinforced stringer grid system
  • Heavy duty rub rail
  • Forward anchor locker with hanging anchor support
  • Deluxe console with completely lined & finished interior (has room for a head) 
  • Lockable recessed electronic panel (folds away when not in use)
  • Waterproof switches and breaker panel
  • Recessed bow handrail
  • Oversized compass
  • One series 31 Gel Cell battery per engine (with aluminum battery boxes) 
  • All navigational lights
  • Self bailing cockpit
  • Molded hatches with O rings
  • 320 gallons of fuel STANDARD
  • Under gunwale lights
  • Gem Lux stainless thru hulls
  • Multi-ball valves (allows engines to run off more than 1 fuel tank)
  • (3) 2000 GPH Rule Bilge pumps
  • Aluminum Tilt steering wheel with speed knob
  • Stainless D rings
Specifications
Length Overall - 36' 8"
Beam - 10'
Deadrise at Transom - 22 Degrees
Weight - 9,200lbs. (w/power)
Maximum Fuel Capacity - 475 gallons
Horsepower Outboard - 1000hp
Speed 70+ MPH

Notable Standard Equipment
Saltwater Washdown
Livewell in Floor - 60 gallons
Livewell in Transom - 50 gallons
Four Large Fish Boxes
Completely Finished Inside Console
Molded Stringer System
Cored Hull and Vaccuum Bagged
Published in Invincible Boats
Sunday, 18 September 2011 11:29

Invincible Boats 33' Open Fisherman

The Invincible 33' is a completely new 33 foot center console that is designed by renowned naval architect Michael Peters. All molds and parts for the boat have been manufactured by Marine Concepts on a computerized 5 axis CNC. This boat is not stretched, cut, or copied from any other existing boats. It is a brand new boat.

This boat is designed to run on twin engines faster and more economically than similar boats with TRIPLE engines! It’s multi-step, ventilated hull provides a ride that is unmatched. The boat will achieve higher speeds than 65 mph with twins. This is something that has never been achieved on such a large fishing boat until now.

If you’re looking for a fast, dry twin engine rig that will run with the big boys, this is your boat. This is truly a serious high performance fishing machine.

 invincible_33_powerboat

STANDARD FEATURES

  • Corecell vacuum bagged hull 
  • 100% vinylester resin-hull NO WOOD
  • Stainless pop up cleats
  • Hydraulic steering
  • 1 Baitwell in Transom with Rule 1500 gph pump
  • 1 Baitwells in Deck with Rule 1500 gph pump
  • Salt water washdown
  • High speed pickup for livewells and washdown
  • 4 gunwale rod holders
  • Hi performance K Plane trim tabs
  • Tin copper wiring-all heat shrunk ends
  • Two deep fish boxes 600 quart and 720 quart
  • Diamond non skid throughout the cap and deck
  • Molded reinforced stringer grid system
  • Heavy duty rub rail
  • Forward anchor locker with hanging anchor support
  • Deluxe console with completely lined & finished interior (has room for a head) 
  • Lockable recessed electronic panel (folds away when not in use)
  • Waterproof switches and breaker panel
  • Recessed bow handrail
  • Oversized compass
  • One series 31 Gel Cell battery per engine (with aluminum battery boxes) 
  • All navigational lights
  • Self bailing cockpit
  • Molded hatches with O rings
  • 320 gallons of fuel STANDARD
  • Under gunwale lights
  • Gem Lux stainless thru hulls
  • Multi-ball valves (allows engines to run off more than 1 fuel tank)
  • (3) 2000 GPH Rule Bilge pumps
  • Aluminum Tilt steering wheel with speed knob
  • Stainless D rings
Specifications
Length Overall - 32' 10 "
Beam - 9.7'
Deadrise at Transom - 22 Degrees
Weight - 8,100lbs. (w/power)
Maximum Fuel Capacity - 300 gallons
Horsepower Outboard - 700hp
Speed 65+ MPH

Notable Standard Equipment
Saltwater Washdown
Livewell in Floor - 60 gallons
Livewell in Transom - 50 gallons
Four Large Fish Boxes
Completely Finished Inside Console
Molded Stringer System
Published in Invincible Boats
Tuesday, 09 August 2011 10:44

Beneteau Flyer 550 Sun Deck Power Boat

Perfectly designed to take full advantage of sea and sun, these three new boats on the Beneteau Flyer 550 Sun Deck Power Boat combine taut and elegant lines designed by Pierangelo Andreani with a particularly high performance hull. Let yourself be carried away!

Even the most compact is already surprisingly spacious, with a large cockpit, proper sunbathing platform and ergonomic helm position. The sea is at your command.

  • Planing hull, stable and fast
  • Increased performance with 115 HP engine
  • Space worthy of a 6m boat due to the aft bench position
  • Wide cockpit bench capable of seating 4 persons
  • Ergonomic, comfortable helm position capable of taking 2 persons
  • Large forward sunbathing platform
  • Cabin: large amount of stowage space and easy access through the sliding door
  • Trailerable
Beneteau_Flyer_550_Sun_Deck_Power_Boat
Naval Architect Beneteau Power
Boat Designer P .Andréani
Length Overall 5.71 m
Hull Length 5,21 m
Hull Beam 2,34 m
Max. Engine Power 150 hp
Fuel Capacity 100 l
CE Certification C6 / D6
Light Displacement 970 Kg

Beneteau Flyer 550 Sun Deck Power Boat Construction -
Composition: GRP and additional foam buoyancy. White hull.
Winching eyebolt on bow.

Beneteau Flyer 550 Sun Deck Power Boat Deck -
Composition: GRP Sandwich with high density Airex foam core.
Stainless steel open pulpit.
Aluminium bow roller fitting.
Self-draining anchor well with closing hatch.
Eyebolt for attaching bitter end.

Published in Beneteau
Tuesday, 09 August 2011 10:38

Beneteau Flyer 650 Cabrio

The two new FLYER Cabrios with their fast hulls allow day trips or coastal cruising sheltered from the wind and spray behind an elegantly shaped glass windscreen. Pierangelo Andreanis deck design shows a sporty temperament, which will not escape the notice of water sports afficionados

  • Large comfortable cockpit:
  • Wide protected sunbathing platform
  • Large practical cockpit:
  • Sprayhood stowage built-in to transom
  • Removable cushions and backrests for over-wintering
  • 2 stowage lockers in bench seats
  • Versatile anchoring and boarding:
  • A proper cabin for coastal cruising
  • Double berth
Beneteau_Flyer_650_Cabrio
Naval Architect BENETEAU POWER
Boat Designer P. ANDREANI
Length Overall 6.15 m
Hull Length 6.03 m
Hull Beam 2.44 m
Max. Engine Power 200 HP
Fuel Capacity 137 l
Water Capacity 50 l
Draught 0.40/0.80 m
Air Draught 1.55 m
CE Certification C7 D7
Light Displacement 1435 kg

Glamorous and sporty!

The two new FLYER Cabrios with their fast hulls allow day trips or coastal cruising sheltered from the wind and spray behind an elegantly shaped glass windscreen. Pierangelo Andreani’s deck design shows a sporty temperament, which will not escape the notice of water sports’ afficionados.

Generous cockpit

The feeling of comfort combined with the protection of the all-round windscreen is further emphasised by a surprisingly spacious cockpit. The seats with cushions, backrests and headrests (six in the Flyer 550 Cabrio, seven in the 650 Cabrio) form a semicircle around the double-seat helm position.

Be even more sociable, the Flyer 650 Cabrio also gives the benefit of an exterior galley.

FLYER 550 CABRIO

Length overall: 5.35m
Hull length: 5.21m
Hull beam: 2.34m
Light displacement: 1,030 kg
Draught: 0.2 / 0.6m
Fuel capacity: 100L

Fresh water capacity: 0L Maximum recommended engine size: 115HP
Navigation categories requested : C6/D6
Night space in the cabin and cockpit

With their double berth sleeping cabin forward and their convertible cockpit, these two new Flyer Cabrios increase the choice of sailing activities. Very easy to install, the cabriolet hood gives builtin protection allowing two additional people to be accommodated for the night.

Principal features:

  • Large, comfortable cockpit:
  • 6 seats with cushions, backrests and headrests for the Flyer 550 Cabrio/ 7 for the Flyer 650 Cabrio
  • Driver’s seat with bolster function (sitting/ standing)
  • Tilting backrest/ lounger (Flyer 550 Cabrio); co-driver’s seat/ sunbed (Flyer 650 Cabrio)
  • Excellent protection by means of a wide windscreen surrounding the cockpit
  • Built-in protection with the cabriolet hood (very easy to install)
  • Practical cockpit:
  • Hood stowage built into transom
  • Removable cushions and backrests
  • Two stowage lockers in bench seats
  • Flexibility when anchoring and boarding:
  • Anchor from bow/stern (flexibility of two anchor wells)
  • Boarding access forward and aft

On the Flyer 650 Cabrio:
The same features as the FLYER 550 Cabrio with, in addition:

  • Wide, protected sunbathing platform in cockpit
  • Real cabin:
  • Double berth (Trajan Sand upholstery- Optional)
  • For coastal cruising:- Pressurised fresh water + refrigerator (option) + hob (optional)
Published in Beneteau
Friday, 05 August 2011 17:20

Beneteau Flyer 750 Cabrio

Water sports enthusiasts as well as those just wanting relaxation will love the performance of this outboard model, which claims to offer exceptional and innovative comfort across all types of sailing ground, whether sheltered, windy or very sunny. Or perhaps the retro charm and sportiness of its refined lines alone will be enough to win their hearts. Designed by Pierangelo Andréani, this sleek streamlined design is aimed at day-boating for water sports activities or trips to an anchorage, bathing, relaxing and the joy of sailing.

  • Airt Step Hull
  • Large comfortable cockpit:
  • Wide protected sunbathing platform
  • Sprayhood stowage built-in to transom
  • Removable cushions and backrests for over-wintering
  • A proper cabin for coastal cruising
  • Double berth
Beneteau_Flyer_750_Cabrio
Naval Architect BENETEAU POWER BOATS
Boat Designer ANDREANI
Length Overall 7.20 m
Hull Length 6.99 m
Hull Beam 2.51 m
Max. Engine Power 300 cv - 2 x 150 cv
CE Certification C8/D8 demandé
Light Displacement 2 080 kg
Published in Beneteau
Friday, 05 August 2011 17:15

Beneteau Antares 42

The Antares 42 will be previewed at the Paris and London Boat Show. An Antares has never offered such a large living space ! Designed for cruising with the family, the Antares 42 offers with vis-a-vis, large Flybridge, 2 cabins, 2 washrooms, a convertible saloon for 6 berths on one of the most efficient hull on the market.

  • Large living space
  • Designed for cruising with the family
  • Larger volume : saloon
  • A convertible saloon for 6 berths
  • Most efficient hull on the market
  • Performance: speed versus fuel consumption
  • Wheelhouse size and brightness
  • very large convertible saloon
  • 3-panel glazed door
  • Owners cabin shower

Beneteau_Antares_42

Naval Architect BENETEAU POWER BOATSmage
Boat Designer SARRAZIN DESIGN
Length Overall 13.99 m
Hull Length 12.80 m
Hull Beam 4.09 m
Max. Engine Power 2 X 380 hp (Yanmar)
Fuel Capacity 2 x 600 l
Water Capacity 320 l
Draught 1.10 m
Air Draught 4.75 m
CE Certification B10 / C12 / D12
Light Displacement 9 900 kg
Berths 6

HULL
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - White gel coat - Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fibre) - Profile: Semi-floating lower hull with bell V bow - Side stabiliser skids -

DECK
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - Structural counter moulding in monolithic laminate - Composition: (Polyester resin - Glass fibre) - White gel coat - Diamond tip type non-slip covering -

OPTIONS
PACKS ELECTRONIC

  • Digital radar 4 Kw • Receiver AIS
  • VHF Double station
  •  

OTHER OPTIONS

  • Woodwork Alpi Mahogany “Grand Brillant” • Complete mooring kit
  • Aft cockpit closing Dune • Console cover Fly
  • Bimini top Flying bridge • Cockpit wheelhouse cover Dune
  • Hydraulic gangplank Stainless steel • White outside wheelhouse curtains
  • Pump for deck washing (Sea water) • Shore freshwater supply
  • Generator 9,5 KVA 220V/50HZ ONAN • Ice maker Cockpit 220V
  • Air conditioning 220V • Forced air heating fuel
  • Carpet AURAY • Rigid reserve WC 50L Drain Deck/Sea grav.
  • tarboard forward • Quiet Flush electric toilet Port forward
  • White and steel blue hull • TV aerial
  • Television LCD 20’’ + DVD and MP3 player in master cabin
  • Television LCD 20’’ + DVD/MP3 player in the saloon
  • Fully electric kitchen 220V (Ceramic hob + Microwave oven/ Grill)
  • Solid wood decked catwalks
Published in Beneteau
Friday, 05 August 2011 17:10

Beneteau Antares 36

The Antares 36 inaugurates the new generation of large Antares with the keywords more space, and more comfort.

The first powerboat to offer a large complete flybridge (driving position + saloon + sunbathing platform).

The first powerboat to offer 2 double berth cabins.

  • Greater living space - Large flybridge (dimensions same as Antares 12 flybridge)
  • Large L-shaped galley opposite saloon
  • Removable saloon seats
  • Practical layout
  • Ample stowage (under saloon and driver benches)
  • Wide access hatches to technical areas (engine plumbing electricity)
  • Sliding door to owners cabin
  • Heads with separate shower andWC compartments
Beneteau_Antares_36
Naval Architect BENETEAU POWER
Boat Designer P. SARRAZIN
Length Overall 11.35 m
Hull Length 9.97 m
Hull Beam 3.80 m
Max. Engine Power 2x260 HP
Fuel Capacity 640 l
Water Capacity 320 l
Draught 1.00 m
CE Certification B8 / C10
Light Displacement 6 540 kg

HULL

  • Composition: Sandwich (Polyester resin Glass fibre / Balsa core)
  • White gel-coat
  • Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fibre)
  • Profile: Semi-floating lower hull with bell V bow - Side stabiliser skids -

DECK
Composition: Sandwich (Polyester resin - Glass fibre / Balsa core) - Part counter moulding structure in monolithic laminate (Polyester resin - Glass fibre) - White gel-coat - Diamond tip type non-slip surface - Joining hull / deck with sheer rail aluminium and grey rubber -

  • 11.37 m
  • 3,88 m
  • 0,9 m
  • 7 076 kg
  • 324 l
  • 650 l
  • Volvo 2 x 260 HP
  • 2
  • 4+1
  • 1
Published in Beneteau
Friday, 05 August 2011 17:06

Beneteau Flyer 650 Sun Deck Power Boat

Perfectly designed to take full advantage of sea and sun, these three new boats on the Beneteau Flyer 650 Sun Deck Power Boat combine taut and elegant lines designed by Pierangelo Andreani with a particularly high performance hull. Let yourself be carried away! Even the most compact is already surprisingly spacious, with a large cockpit, proper sunbathing platform and ergonomic helm position. The sea is at your command.

  • Stable and performance planing hull
  • Trailerable
  • Wide 5 / 6-seater cockpit bench
  • Versatile cockpit for fishing or cruising
  • Large sunbathing platform forward
  • Choice of 2 drivers seats: Bolster function or Leaning post
  • double berth
Beneteau_Flyer_650_Sun_Deck_Power_Boat
Naval Architect BENETEAU POWER
Boat Designer P. ANDREANI
Length Overall 6.15m
Hull Length 6,03m
Hull Beam 2,44m
Max. Engine Power 175hp
Fuel Capacity 137 l
Water Capacity 50 l
Draught 0,40 / 0,80
Air Draught 1,60m
CE Certification C7 / D7
Light Displacement 1390m

HULL

Composition: Polyester - Injection moulded hull - White gel-coat - Hull completely counter moulded - Composition: Polyester - Winching ring on bow -

DECK

Composition: Polyester sandwich - White gel-coat -

Published in Beneteau
Monday, 01 August 2011 12:35

Beneteau Antares 32

The Antares 32 is the first twin-engined Flybridge in the BENETEAU range, and delivers exceptional responsiveness and comfort at sea for exceptional responsiveness .

The twin-engined configuration provides much greater manoeuvrability in port and better balance underway. The model will make its first appearance at the Genoa Boat Show in October 2010, then Barcelona. Not Present at Paris or London

  • First twin-engined Flybridge
  • Exceptional responsiveness
  • Twin Nannii T4-200
  • First appearance at the Genoa Show Oct 2010

Beneteau_Antares_32

Boat Designer Sarrazin Design
Length Overall 10.22 m
Hull Length 9.20 m
Hull Beam 3.33 m
Max. Engine Power 2 x 200 CV
Fuel Capacity 375 L
CE Certification B8/C10
Light Displacement 4 515 kg

HULL Composition:

  • Sandwich (Polyester resin - Glass fiber / Balsa core)
  • 'white gel coat
  • Counter moulding of integral structure hull in monolithic laminate (Polyester resin - Glass fiber) Profile:
  • Semi-floating lower hull with bell V bow
  • Side stabiliser skids

DECK Composition:

  • Sandwich (Polyester resin - Glass fiber / Balsa core)
  • Part counter moulding structure in monolithic laminate (Polyester resin - Glass fiber)
  • White gel coat
  • Diamond tip type non-slip covering
  • Joining hull / deck with sheer rail aluminium and grey rubber

 

Published in Beneteau
<< Start < Prev 1 3 4 5 6 > End >>
Page 1 of 6